Safety; Intended Use - HOLZMANN MASCHINEN TK 305 Manual De Intrucciones

Ocultar thumbs Ver también para TK 305:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
13

SAFETY

13.1

Intended Use

The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
Sawing in wood or woodlike matirials (plastic).
Any manipulation of the machine or its parts is a misuse, in this case HOLZMANN-
Machines and its sales partners cannot be made liable for ANY direct or indirect damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
Ambient conditions
The machine may be operated:
humidity
temperature
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
Prohibited use
The operation of the machine outside the stated technical limits described in this manual is
forbidden.
Operation of the machine function without emergency stop button or impeller box with open
doors is prohibited.
The use of the machine not according with the required dimensions is forbidden.
The use of the machine not being suitable for the use of the machine and not being certified
is forbidden.
Any manipulation of the machine and parts is forbidden.
The use of the machine for any purposes other than described in this user-manual is
forbidden.
The unattended operation on the machine during the working process is forbidden!
It is not allowed to leave the immediate work area during the work is being performed.
The machine has not be used for slotting, rabbeting or grooving!
HOLZMANN MASCHINEN GmbH
Use only blades allowable for this machine!
Never use a damaged blade!
Use the machine never with defective or without mounted guard
HIGHEST RISK OF INJURY!
www.holzmann-maschinen.at
W A R N I N G
max. 70%
+5°С to +40°С (+41°F to +104°F)
SAFETY
34
TK 305

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido