Use As A Mitre Saw; Important - HOLZMANN MASCHINEN TK 305 Manual De Intrucciones

15.3

Use as a mitre saw

Fixing knob 1 loosen up (6-1)
ATTENTION !
press the operating handle
light down
Remove the "lower blade
guard".
Insert the lower blade guard
after the end of the work.
HOLZMANN MASCHINEN GmbH
Diagram-6-4
Fixing knob 2 loosen up (6-2)
Diagram-6-4
1
so this allows the locking bolt
(1) easily pull out of the hole
and the crosscut saw swings
upward. (6-4)
Install the clamp groupware:
a) Hold the "clamp groupware" pole, insert it to the hole in the
"location plate" left side.
b) fix with the "butterfly screw" 1
www.holzmann-maschinen.at
OPERATION
Diagram-6-5
Pull worktable -with locking
plate- all the way up and
back positioning with 1 and 2
clamp top. (6-3)
Diagram-6-5
Locking bolt completely
pulled out of locking plate.
(6-5)
IMPORTANT: worktable must
be clamped on the top !
41
TK 305