Adjust The Length Of The Charging Cable - Skoda iV Charger Manual De Instrucciones

EN

10.2 Adjust the length of the charging cable

1. Loosen the two screws of the charging cable strain relief with a Torx 10 screw-
driver.
2. Hold the cable and adjust the position of the charging cable holder by turning it
counterclockwise.
3. When the desired length is reached, adjust the orientation of the charging cable
holder and tighten the two screws of the strain relief with a torque value of
4 Nm.
4. Adjust the length of the wires as required.
* For ŠKODA iV Charger Connect and ŠKODA iV Charger Connect+ only.
54