Installing The Memory Card - Allen-Bradley PanelView 550 Instrucciones De Instalación

Installing the Memory Card

The memory card retainer is required for UL508 installations where a memory card
is inserted in the card slot. The retainer protects against Electrostatic Discharge
(ESD) up to 15KV and prevents accidental removal of a memory card in high
vibration environments.
To attach the memory card retainer:
Retainer Base
Memory Card
Retainer
1. Secure the base of the retainer over the existing memory card slot using the
two screws provided. Tighten screws to a torque of 6 to 8 inch lbs (.7 to .9
N•m).
2. Insert the memory card and install the retainer until it is properly seated.
3. To remove the retainer, press the tabs on each side and pull.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PanelView 550 Terminals
Base Mounting Screws
Publication 2711-IN009D-MU-P
9