Tabla de contenido
Publicidad
Power button
Touche d'alimentation
Botón de alimentación
Control panel
Écran de
commande
Panel de control
62
E
TURNING ON THE POWER
1
Remove the lens cap.
2
Press the Power button to turn it on. In the Record mode,
the remaining battery power appears on the control panel,
and the lens comes out.
To turn it off, press the Power button again. The display on
the control panel disappears and the lens retracts.
Note:
Do not turn on the power without removing the
lens cap first.
If you do not operate the camera for three
minutes, the camera will be set to the stand-by
mode. After four hours in the stand-by mode, the
power turns off automatically. (Time varies
depending on the type of batteries used.)
To turn on again, press the Power button.
Set the date before taking pictures. (p. 182)
Publicidad
Tabla de contenido
