Tabla de contenido
Publicidad
Display mode
Mode d'affichage
Modo de
indicación
154
Video output connector
Prise de sortie vidéo
Conector de salida de video
Jog dial
Molette de
défilement
Disco Jog
E
CONNECTING TO A TELEVISION
Recorded images can be viewed on a TV.
Make sure that the power of the TV and the camera are off
before connecting.
1
Connect the cable by inserting it into the video output
connector of the camera and the input connector of the
TV.
2
Turn on the TV.
3
Set the Mode dial to "
select the Display mode.
4
Select a picture with the Jog dial.
When using the remote control
Aim the remote control at the Remote control window on the
camera. Press the +/– buttons to select a picture. Press the
W button for Index-Display. Press the T button for Close-Up
display, and select the section to view with the +/– buttons.
Note:
The LCD monitor turns off automatically when
connected to a TV.
Refer to your TV/VCR instruction manual for
information about displaying video images.
The picture may appear to be off-center on the TV
screen because of the TV adjustment.
Your TV may produce a black frame around the
picture, which may look peculiar when printed to a
video printer.
The use of the optional AC adapter is recommended.
Images shown on screen can be saved to video tape.
" then turn on the power to
Publicidad
Tabla de contenido
