Bluetooth - Kenwood NX-5700 Manual De Usuario

If your transceiver has been programmed with the Bluetooth function, you can
connect your transceiver with a Bluetooth headset to make hands-free calls.
The Bluetooth specifications are as follows.
Version : Version 3.0
Power class : Class 2 (2.5 mW, up to 10 m)
Profile : Headset Profile (HSP)
Device class : Phone
Note:
The communication distance varies depending on the obstacles between the
●
communication devices and the radio wave conditions.
Only headsets which support the Headset Profile (HSP) certified by Bluetooth SIG can be
●
used with the transceiver. However, operations are not guaranteed in all headsets.
TURNING Bluetooth ON/ OFF
Press the key programmed as [Bluetooth] to turn the Bluetooth function on or off.
Alternatively, press the key programmed as [Menu] to enter Bluetooth Mode using
the Menu Mode.
Press the [J] and [K] keys to select "On" or "Off".
Press the [ ] key to confirm your selection.
" " appears on the display when the Bluetooth function is turned on. If a Bluetooth device
●
is already connected to your transceiver, "
FINDING Bluetooth DEVICES
Your transceiver can automatically search for Bluetooth devices.
Note:
Put your Bluetooth headset into pairing standby mode beforehand.
●
1
Press the [ ] key to enter Menu Mode.
42

Bluetooth

" appears on the display.