Selecting A Zone And Channel - Kenwood NX-5700 Manual De Usuario

2
Enter a code using the [J] and [K] keys.
On an optional microphone with keypad, you can enter the password directly by
●
pressing the keypad.
3
Press the [ ] key to accept the code.
4
Repeat steps 2 and 3 to enter the entire password.
Press the [
●
to delete all codes.
5
Press the [ ] key to confirm the entry.
If you enter an incorrect password, an error tone sounds and the transceiver remains
●
locked.
The password can contain a maximum of 6 digits.
●

SELECTING A ZONE AND CHANNEL

1
Select the desired zone using the keys programmed as [Zone Up]/ [Zone
Down]. Each zone contains a group of channels.
2
Select the desired channel using the keys programmed as [Channel Up]/
[Channel Down]. Each channel is programmed with settings for transmitting and
receiving.
The transceiver may have names programmed for zones and channels. The zone
●
name and channel name can contain up to 16 and 14 characters respectively.
4
] key to delete an incorrectly entered code. Press and hold the [ ] key