Protective Clothing; Classification Of The Warnings; Emergency Information - Abicor Binzel ABICLAMP Traducción Del Manual De Instrucciones Original

ABICLAMP
2.6

Protective clothing

• Do not wear loose fitting clothing or jewelry.
• Use a hair net for long hair.
2.7

Classification of the warnings

The warnings used in the operating instructions are divided into
four different levels and shown prior to potentially dangerous work
steps.
DANGER
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results or potential material damage to the equipment.
2.8

Emergency information

In the event of an emergency, immediately disconnect the following
supplies:
• Electrical power supply.
3 Putting into operation
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert and modify the device to enhance its performance without authorization.
• Keep limbs away from the clamping area.
• Only qualified personnel are permitted to perform work on the device or system.
4 Disassembly
 DE Ausrüsten / BE Аснашчэнне / CS Výbava / EN Equip /
ES Equipar / FI Varustaa / FR Equiper / HU Felszerelni /
KK Жабдықталуы / NL Uitrusten / NO Utruste /
PT Equipamento / RU Оснащение / SV Utrusta on page 3
BAL.0830.0 • 2020-09-18
• During operation of the welding torches and in connection
with the welding process, always wear safety goggles,
protective gloves and, if required, a breathing mask.
Arranged in descending order of importance, they have the
following meanings:
Further measures can be found in the "Power source" operating
instructions or the documents for further peripheral devices.
Disassembly is carried out in reverse order.
EN - 15