Tools And Materials; Before You Begin - Kohler K-3597 Manual Del Usuario

Ocultar thumbs Ver también para K-3597:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Tools and Materials

Supply
10" Adjustable
Shut-Off
Wrench
Valve
Tubing Cutter
Wax Seal

Before You Begin

WARNING: Risk of personal injury or water damage.
Contents of the vessel are under pressure and can cause
severe injury. Do not open or service before reading these
installation instructions or service instructions. Turn off the
water supply and flush the unit to release pressure before
attempting any service.
CAUTION: Risk of personal injury or product damage.
Handle with care. Vitreous china can break or chip if the
product is handled carelessly.
CAUTION: Risk of product damage. Do not use any oils or
lubricants on or in the pressure system.
IMPORTANT! Make sure the supply pressure is a minimum of 35
psi (2.4 bar). The toilet will not function properly without minimum
pressure.
Observe all local plumbing and building codes.
Carefully inspect the new toilet for damage.
If the existing toilet does not have a supply shut-off valve below
the tank, install one before installing the new toilet.
Toilet is designed for 12" (30.5 cm) roughing-in.
Kohler reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1086530-2-A
Tape
Sponge
Level
Measure
Plus:
• 5/16" T-Bolts with Nuts
and Washers
• Metal File
• Toilet Supply Tubing
Safety
• Hacksaw
Glasses
• Screwdriver
2
Putty Knife
Kohler Co.

Publicidad

Tabla de contenido
loading

Tabla de contenido