Maintenance - DeVilbiss IntelliPAP DV51 Standard CPAP Serie Manual Del Usario

EN
inTelliPaP mainTenanCe
DANGER
Electric shock hazard – Do not attempt to open or remove the enclosure;
there are no user-serviceable components inside. If service is required,
contact your home care provider for instructions on obtaining service of
your device. Opening or attempting to service your device will void the
warranty.
WARNING
If the operation of the device appears to deviate from normal operation or
begins to produce unusual sounds, discontinue use and contact your home
care provider for assistance.
If the device has been dropped, verify functionality of the device. If the
device does not function or the enclosure is damaged, discontinue use and
contact your provider.
If the device does not appear to be functioning properly refer to the
Troubleshooting section for instructions.
Pressure Accuracy–The IntelliPAP is designed to provide accurate pressure performance
from the factory without additional calibration. No routine service is required for a period of
2 years of use, provided the device is used in accordance with the manufacturer's directions.
After 2 years the device should be inspected.
NOTE–
Some countries require periodic servicing and calibration of this kind of medical device. Contact your
home care provider for further information.
Standard Air-Inlet Filter–Check the filter every 10 days and clean it if necessary. Replace
the filter every 6 months or sooner if it is damaged. The standard filter is designed to filter
particles larger than 3.0 microns in size. The IntelliPAP MUST have the standard filter in
place during operation.
Optional Fine Particle Filter–Check the filter every 10 days, and replace it if it is dirty or
damaged; otherwise replace the filter every 30 days. The optional fine particle filter is
designed to filter particles as small as 0.3 microns in size and larger.
Filter Maintenance–Refer to Cleaning for instructions.
A-DV51
18

mAintenAnce