How To Start Your Watch - Timex QUARTZ Manual De Instrucciones

Welcome to the world of Timex
watches, the future of quartz analogue technology.
Timex Intelligent Quartz technology brings the power
of a micro-processor to the reliability and accuracy of
quartz analogue timekeeping. With Timex Intelligent
Quartz watches, the technology is written into the design,
delivering a new level of dial complication. Uses up to
three additional independent hands to display an array of
information, normally only available in digital watches,
in a traditional analogue format.
4
Intelligent Quartz
® ™

HOW TO START YOUR WATCH

(Does not apply to Perpetual Calendar models.) To start
your watch remove the plastic guard from under the
crown, then press the crown in against the case. The
second hand will begin advancing in one-second intervals.
Some water-resistant watches require the setting crown
to be screwed in securely to maintain water-resistance. If
your watch case has a protrusion with screw threads, the
crown must be screwed in after setting the watch.
To screw in, push the crown firmly against the threaded
protrusion and hold in while turning the crown clockwise.
Continue to screw in the crown until it is tight. You will
need to unscrew the crown (counter-clockwise) before
pulling it out the next time you want to set your watch.
5