Care And Maintenance - Timex QUARTZ Manual De Instrucciones

2. Turn the crown until the correct time is shown. The
day and date change automatically when the time
reading moves to either side of 12:00 midnight.
3. Push the crown in when finished.
Ensure the correct AM/PM setting by verifying that the
date changes at midnight, not noon.
LEAP YEAR OFFSET
To maintain the correct date, the watch includes a setting
for the current leap year offset. This setting is made at the
Timex factory or after battery replacement and cannot be
changed, only viewed.
To view the offset, pull the crown to its middle position.
The date hand shows the offset: 1 = 1 year after leap year;
2 = 2 years after leap year; 3 = 3 years after leap year;
4 = leap year. Push the crown in when done and the
12
hands resume their normal display of day, month,
and date.

CARE AND MAINTENANCE

To maintain water-resistance, do not press any
buttons under water.
1. The watch is water-resistant only as long as the lens,
push buttons, and case remain intact.
2. The watch is not a diver watch and should not be used
for diving.
3. Rinse the watch with fresh water after exposure to
salt water.
The watch may be cleaned with a cloth and mild soap in
warm water.
The battery should provide 6 years of normal watch use.
The actual battery life may vary depending on actual use.
13