GLOBBER TRIKE 4IN1 Manual De Instrucciones página 9

10. Slide the canopy into the opening at the back of the seat's backrest
until you hear a click.
HOW TO OPERATE THE FREEWHEEL MODE:
The front wheel has two modes of operation.
Unlocked mode: when the pedals are turning independently from the
front wheel.
Locked mode: when the pedals and the front wheel are connected
together and move as one.
To put the front wheel in Locked mode, you need to align the spot on
the red button to the arrows on the inner hub; press the red button on
the locked symbol side until you hear a click.
To put the front wheel in Unlocked mode, you need to align the spot on
the red button to the arrows on the inner hub; press the red button on
the unlocked symbol side until you hear a click.
Warning! Freewheel function is to be used only with the parent handle
(Push bar).
Warning! Check that the push bar (parent handle) is locked in position
before use.
Warning! Automatic freewheeling ensures the tricycle can be pushed
safely while the child's feet rest on the pedals without the pedals
turning.
HOW TO OPERATE THE BRAKES:
The following explanation is only applicable for EXPLORER TRIKE 4in1
infant trike and guided trike mode and EXPLORER TRIKE 3in1 guided
trike mode.
• To operate the rear wheels' brakes, you need to push the rear
brakes down by applying pressure with your foot. You must
always use both rear brakes when you need to stop the tricycle
from moving. The brakes are locked and the tricycle will remain
stationary once you hear a click after pushing down both brakes.
• To unlock the brakes, you need to fully lift up both brakes with your
foot. The tricycle is mobile once you hear a click after pushing up
both brakes.
• The left brake controls the left-hand side rear wheel and the right
brake controls the right-hand side rear wheel.
9