Protemp PT-70-SS-A Manual De Usuario E Instrucciones De Funcionamiento página 10

Ocultar thumbs Ver también para PT-70-SS-A:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Service (Continued):
NOZZLES:
Nozzles should be cleaned or replaced at least
once per heating season. Contaminated fuel
could make this necessary immediately. To clean
dirt from nozzle, blow compressed air through
nozzle front. It may be necessary to soak nozzle
in clean Kerosene or diesel to help loosen any
particles (see Figure 14a and 14b).
70-SS Nozzle
Figure 14a
125-OFR Nozzle
Figure 14b
© 2017, Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING
OR WHILE CONNECTED TO A POWER SOURCE
®
Maintenance: 70-SS / 125-OFR
PHOTOCELL:
The photocell should be cleaned at least once
per heating season or more depending on
conditions. Use a cotton swab and water or
alcohol to clean the lens of the photocell.
Be certain to reinstall the photocell in proper
position as shown below (see Figure 15).
FILTERS:
The fuel filter and oil filter should be cleaned at
least twice per heating season by rinsing it in
clean Kerosene or diesel. Contaminated or old
fuel could make cleaning necessary immediately.
(see Figure 16).
Kerosene Radiant Heater User's Manual
9
Figure 15
Photocell
Figure 16

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pt-125-ofr-a

Tabla de contenido