Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Long Screws (6)
19 mm Axle Nuts (2)
Assembly
1. Slide axle through Wheel Frame and attach
wheels, washers and nuts (see Figure 6).
Figure 6
2. Place main structure on wheel frame and
fasten with long screws provided (see Figure 7).
Figure 7
3. Attach safety guard to front of heater with
screws provided (see Figure 8).
Figure 8
© 2017, Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING
OR WHILE CONNECTED TO A POWER SOURCE
®
Assembly Instructions
What's In The Box
8 mm Nuts (6)
Short Screws (4)
Spacers (2)
Washers (2)
125-OFR
Axle (1)
4. Attach Radiant Visors to the top and bottom
rear of the Radiant Cone Assembly using extra
screws included.
Figure 9
Radiant Visor
Safety
Guard
Radiant
Cone
Assembly
5. Attach top safety guard using the two
outer-most extra screws on the top of the
radiant cone (see Figure 9).
Note: Save the box and packaging materials for
future storage.
Kerosene Radiant Heater User's Manual
5
Wheels (2)
Safety Guards
(Top, Front)
Screws
Visors (2)
Wheel Frame
Top Safety Guard
Publicidad
Tabla de contenido
