Operating Precautions - Sony IPELA SNC-DF70N Manual De Instalación

Operating Precautions

Operating or storage location
Avoid shooting very bright objects (such as
light fittings or sunlight) for an extended
period. Avoid operating or storing the unit in
the following locations:
• Extremely hot or cold places (operating
temperature: –10 °C to +50 °C
(–4 °F to 122 °F))
• Close to sources of powerful
electromagnetic radiation, such as radios
or TV transmitters
• Close to excessively dusty places
• Where exposed to mechanical vibrations
• Close to fluorescent lamps or objects
reflecting light
• Under unstable light sources (it may cause
flickering)
• Close to sources of strong magnetism
Attaching the dome casing
Attach the dome casing securely with the
supplied wrench.
Cleaning
• The dome cover is the optical part. Use a
soft, dry cloth to remove the fingerprints
or dust.
• Use a blower to remove dust from the lens.
• Clean the body with a dry soft cloth. If it is
very dirty, use a cloth dampened with a
small quantity of neutral detergent, then
wipe dry.
• Do not use volatile solvents such as
alcohol, benzene or thinners as they may
damage the surface finishes.
Using the camera outdoors
Make sure that the waterproof rubber gasket
of the dome casing is put in place, and attach
the dome casing securely to the unit casing.
Make sure you seal the locations listed
below with sealant (e.g. silicon sealant) to
prevent moisture from getting inside the
casing.
• Camera installation holes (4)
• Conduit holes (side/bottom)
In the event of any problems with the
operation of the camera, contact your Sony
dealer.
Note on laser beams
Laser beams may damage the CCDs. If
you shoot a scene that includes a laser
beam, be careful not to let a laser beam
become directed into the lens of the
camera.
7
GB
Precautions