Dyna-Glo DGP552SSP Manual Del Usuario página 25

CARE AND MAINTENANCE
Cleaning the Burner Assembly
– Make sure the grill is cool
1. Ensure all burner ports are clear of clogs. Use of a pin or paper clip works well.
2. Ensure burner is free of any damage. If damage is found, replace with new burner.
3. Ensure the end of the burner and primary air screen are clear from insect nests, dirt or debris.
Re-installing the Burner
Reattach each burner with the hinge pin and reattach the ignition wire to electrode.
Incorrect Incorrect Correct
Bottom View
View the correct position
WARNING
causing serious bodily injury or death.
Other Care and Maintenance
service person.
It is recommended that you always check that the outdoor cooking appliance area is clear and free
obstructed.
It is recommended that you regularly check that the ventilation openings of the grill cabinet
are free and clear from debris.
It is recommended that you regularly check and clean the burner/venturi tubes for insects and insect
25