Warning Icons And Error Codes; Meaning Of The Warning Icons; Meaning Of Error Codes - Philips 3100 Serie Manual Del Usario

Warning icons and error codes

Meaning of the warning icons

Fill the water tank with
fresh water to the MAX
level indication.
ADD WATER
The bean hopper is empty.
Put new coffee beans in
the bean hopper.
ADD COFFEE
The brew group is not in
the machine or it is not
inserted correctly. Insert
the brew group.
The coffee grounds
container is full. Make sure
the machine is turned on.
Then remove and empty
the coffee grounds
container.
Insert the drip tray.

Meaning of error codes

Below you find a list of the error codes showing problems that you can solve yourself. Video
instructions are available on www.philips.com/coffee-care. If another error code appears,
please contact the Philips Consumer Care Center in your country. For contact details, see the
warranty leaflet.
English
Close the service door.
The brew group is blocked
by coffee powder. Clean the
brew group.
There is air is the machine,
place a cup under the hot
water spout and select Ok
to start priming. Make sure
the hot water spout is
inserted before starting the
process.
The lid of the bean hopper
is open. Close the lid of the
bean hopper.
If the display shows an error
10
code, check section
'Meaning of the error codes'
xx
to see what the code on the
display means and what
you can do. The machine
cannot be used when this
icon is on the display.
25