Thermador PROFESSIONAL PRO GRAND Serie Manual De Instrucciones página 6

®
4. Remove Star Burner caps, and then remove the two
Torx screws from each burner base using a T-27 or
T-30 driver.
5. Disconnect the female terminal on the spark wire from
the male terminal on the electrode for each burner.
Important:
The locking tab on the female connector must be
depressed to release from the terminal on the electrode.
English 4
6. Using a 4mm hex wrench, remove the screw attaching
each of the burner pedestals.
7. With the burner assemblies removed, the main top is
ready to be lifted off of the appliance.
8. An Allen Wrench or similar item can be used as a hook
to lift the main top up, sufficient for removal.