Mounting Steps - Lenze ERBS Serie Instrucciones Para El Montaje

Free spaces for mounting variant
x Wiring clearance
y Cable bending radius
All dimensions in millimetres

Mounting steps

How to mount the brake resistor:
1. Select a suitable mounting location.
– The mounting location must always ensure the operating conditions mentioned in
the technical data; if required, additional measures must be taken.
– Ensure unimpeded air circulation for heat dissipation.
2. Screw down the brake resistor at the mounting location.
– The mounting location and the mounting material must ensure the permanent
mechanical connection.
EDKRBS047R DE/EN/FR/ES/IT 8.0
Mechanical installation
l
Mounting steps
ERBS105
5
49