Siemens 7ME3951-0TG20 Instrucciones De Manejo Resumidas página 14

Operation
Velocity Rate
● Setting Velocity
1. Press [Menu/Confirm] key into "Setting velocity" state.
2. Press [Change Setting] or [Increase Symbolized Number] key to change velocity
rate.
3. Press [Menu/Confirm] key to Enter/Confirm.
● Velocity Measurement
Measuring the thickness of a known sample
1. Press [Menu/Confirm] key into "Velocity measurement" state
2. Press [Change Setting] or [Increase Symbolized Number] key to scroll up and
down for the value of velocity to determine the thickness is the same as the value of
the sample being measured.
3. Press [Menu/Confirm] key again. The gauge will store the velocity rate
automatically.
Probe Setting
The gauge provides one type of user probe.
1. Press [Menu/Confirm] key into "Probe selecting" state.
2. Press [Change Setting] or [Increase Symbolized Number] key to select probe.
3. 1=normal probe (PT-08)
4. Press [Menu/Confirm] key to Enter/Confirm.
Resolution
1. Press [Menu/Confirm] key into "Resolution" state.
2. Press [Change Setting] or [Increase Symbolized Number] key to select resolution
and unit (1=0.1 mm)
3. Press [Menu/Confirm] key to Enter/Confirm.
Thickness Gauge
5
A6X30021999-06, 03/2012