Product Information; Declaration Of Conformity; General Power Tool Safety Warnings - Hilti HDE 500-A22 Manual De Instrucciones

This symbol is intended to draw special attention to certain points when handling the product.
1.3 Explanation of symbols used
1.3.1 Symbols
The following symbols can be used on the product:
National waste-materials management system
"Off" position
Continuous dispensing
Measured dispensing
Direct current (DC)
Li-ion battery
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
Hilti Li-ion battery type series used. Observe the information given in the section headed In-
tended use.
The power tool supports near-field communication (NFC) technology, which is compatible with
iOS and Android platforms.
2 Safety
2.1

Product information

products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Type:
Generation:
Serial number:
2.2

Declaration of conformity

We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
2.3

General power tool safety warnings

WARNING Read all safety warnings, instructions, illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
*2017692*
2017692
HDE 500-A22
01
English 11