Product Information; Declaration Of Conformity; Safety Instructions - Hilti HIT­-P 8000 D Manual De Instrucciones

National waste-materials management system
2 Safety
2.1

Product information

products are designed for professional users and only trained, authorized personnel are permitted
to operate, service and maintain the products. This personnel must be specifically informed about the
possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Type:
Generation:
Serial number:
2.2

Declaration of conformity

We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
2.3

Safety instructions

WARNING Study all safety instructions and other instructions, images and technical data with
which this power tool is provided. Failure to observe the instructions below can result in electric shock,
fire and/or serious injury.
Keep all safety precautions and instructions for future reference.
Work area safety
▶ Keep your workplace clean and well lit. Cluttered or poorly lit workplaces invite accidents.
▶ Ensure that the workplace is well ventilated.
▶ Keep children and other persons clear when the tool is in use. Distractions can cause you to lose
control of the tool.
▶ Keep the workplace tidy. Clear the work zone of objects that could cause injury. Untidiness at the
workplace can lead to accidents.
▶ When working, always guide the compressed-air hose to the rear and away from the tool. This
reduces the risk of tripping over the compressed-air hose.
▶ When working on a scaffold, always secure the tool. This will help prevent it falling.
Personal safety
▶ Stay alert, watch what you are doing and use common sense when working. Do not use a tool
while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while
operating the tool can result in serious injury.
▶ Wear your personal protective equipment and always wear protective glasses. Depending on the
type of tool you are using and its purpose, wearing safety equipment such as a dust mask, slip-resistant
safety shoes, a hard hat or hearing protection will reduce the risk of injury.
▶ Always hold the tool firmly with both hands on the grips provided. Keep the grips clean and dry.
▶ Avoid accidental starting. Make sure that the tool is switched off before connecting it to the
compressed-air supply and before picking it up or carrying it. Carrying the tool with your finger on
the switch or connecting the tool to the compressed-air supply with the tool already switched on can
cause accidents.
▶ Adopt the correct posture when working. Maintain proper footing and balance at all times. This
will give you better control of the product in unexpected situations.
▶ Do not allow yourself to be lulled into a false sense of security and do not flout the safety rules
for tools, even if you are familiar with the tool after using it many times. Carelessness can result in
serious injury within a fraction of a second.
8 English
Printed: 18.05.2018 | Doc-Nr: PUB / 5103003 / 000 / 05
HIT­P 8000 D
01
376427
*376427*