Assembly/Disassembly - Vermeiren Turios Manual De Instrucciones

EN
NL
Belt restraints must not be held away
from the
components
wheels.
2.5

Assembly/Disassembly

CAUTION
• Make sure that your fingers, clothes, buckles won't get trapped during (dis)assembly.
Your dealer delivers the wheelchair fully assembled and explains the various operating elements
and their use. We also provide a further, detailed explanation of the different parts here for
transport purposes.
To assemble the electric wheelchair:
1. Mount the arm supports (paragraph 2.5.1).
2. Mount the footrests (paragraph 2.5.2).
To disassemble the electric wheelchair do the reverse of the above instructions.
2.5.1 Mounting or removing the arm support
CAUTION
• Check that the arm pads are at the same height on each side.
1
3
body by wheelchair
such as armrests
Improper belt-restraint fit
Risk of injuries
Risk of injuries and/or damage
2
Mount the armrest (1) by sliding the support rod (2) down into the
frame (3).
To remove the armrest (1), lift it up and out of the seat frame.
Belt restraints make full contact with
shoulder, chest and pelvis.
Pelvic belt low on the pelvis near the
or
thigh-abdominal junction
8
Before use
✓
Proper belt-restraint fit
Turios
2021-03