Jabra CRUISER Manual Del Usuario página 17

Will the Jabra CRUISER work with other Bluetooth equipment?
- The Jabra CrUISEr is designed to work with bluetooth mobile
phones . It can also work with other bluetooth devices that are
compliant with bluetooth version 1 .1 or higher and support
a headset, hands-free and/or advance audio distribution profile .
I cannot use Reject call, call on hold, Redial or voice dialing
These features are dependent on the ability of your phone to
support a hands-free profile . Even if the handsfree profile is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices . Please consult
your device manual for details .
Please note that some features can only be operated from the
primary device e .g . voice dial using Jabra CrUISEr with 2 mobile
phones .
I can not connect speakerphone and radio via FM transmitter
- Make sure the radio is turned on and speakerphone is in FM
mode (FM Status Icon is on) .
- If your radio when searching is not able to find the FM frequency
set by your speakerphone, the FM frequency must be tuned
in manually on the radio . Please read radio manual to find out
how to manually change frequency on your radio .
- If your radio is in Ta (Traffic announcement) mode, switch Ta
off and your radio should be able to find your speakerphone
when using the search function on the radio . If not tune in
manually .
- The sensitivity of the search function on your radio determines
whether it is able to find the frequency set by your speakerphone .
On some radios you are able to adjust the sensitivity thus
making it possible to find the speakerphone frequency when
searching . If not tune in manually .
- In urban areas it might be difficult to find a clear frequency .
It is therefore advisable to use a frequency in the lower or upper
end of the FM frequency band (e .g . 88 .1 or 107 .7 MHz) where
you will have the best chance to find a clear frequency .
Jabra CrUISEr
14