Jabra CRUISER Manual Del Usuario página 31

USING THE FM TRANSMITTER WHEN VOICE ANNOUNCEMENT
FUNCTION IS OFF
If voice announcement function is turned off you can select any of
the pre-programmed frequency channels in the following order:
Pre-pro-
Chan-
grammed
nel No
Frequency
1 88 .1 MHz
2 88 .3 MHz
3 88 .5 MHz
4 88 .7 MHz
5 88 .9 MHz
6 89 .1 MHz
7 89 .3 MHz
To select the desired FM frequency channel, follow these steps:
- Connect your mobile phone and speakerphone .
- Press FM button to enter FM mode . The default frequency
channel is 88 .1MHz
- Press the Volume Up or Volume Down button to move to the
next/previous channel .
- Manually turn your radio into the same FM frequency and you
are now ready to transmit calls or music from your phone to
your car stereo .
Note 1: While changing frequencies the FM Status Icon flashes
every 1 second .
Note 2: While changing frequencies, a repeated beep-tone will be
heard and frequencies can be recognized by the combinations of
Status Indicators . (See the table above .)
LED indication
(FM Frequency selection mode)
Battery Call
status status
Off Off
Off On
On Off
Off On
On Off
On On
On On
Jabra CrUISEr
Blue-
FM
tooth
status
status
On
Off
Off
On Flash
On
Off
On
12