Check The Part - Sony SU-SX10 Instrucciones

Check the part

Name
TV Stand
Install a TV
Arrow indicates front side.
1
Remove the top front cover.
2
Place the TV.
1 Aligning the front corners of the TV pedestal
with the inner sides of the stickers on the
stand, place the TV with the feet on the TV
pedestal's base in the stoppers.
2 Check that the front corners of the TV
pedestal are properly aligned with the inner
sides of the stickers.
Stickers
2
4
(US)
Quantity
1
Top front cover
Feet
Stoppers
1
Notes
• Be sure at least four people carry the TV.
• Hold the TV in the manner specified in the
operating instructions of the TV.
• Avoid placing the TV on the raised side portions of
the stand's top panel or giving any strong shock to
the stand.
• Make sure that the feet on the TV pedestal's base
are properly seated in the stoppers.
3
Attach the top front cover.
CAUTION
Be careful not to pinch your fingers when
attaching the top front cover.
Note
Insert the top front cover until it clicks into place.
4
Secure the top front cover with
two screws.