Adjusting The Height; Using Cut Pipes - Sony PSS-650P Manual De Instalación

Adjusting the Height

Adjustment range: 1,000 mm to 1,675 mm (39
15 31
65 / in.) (25 mm ( /
16 32
* When using a bracket for tension wires:
1,050 mm to 1,675 mm (41
3
/ in. to
8
in.) adjustment pitch)
11 15
/ in. to 65 / in.)
32 16

Using Cut Pipes

You can adjust the height by cutting the outer pipe and
inner pipe.
Cut the pipes at 345 mm (13
the pipes. Cut the pipe, leaving two holes in the center
groove.
Outer pipe
Cut
M5 tap
Note
When cutting the outer pipe, measure and cut 345 mm
19
(13 / in.) from the end with the three M4 tap and one
32
M5 tap holes, as shown in the diagram. The pipe cannot
be used if the other end of the pipe is cut.
19
/ in.) from the end of
32
Inner pipe
Cut
M4 tap
Adjusting the Height
11