Charger; Light Guide/Handpiece; Battery Charging - 3M Elipar DeepCure-L Instrucciones De Uso

SEITE 5 - 148 x 210 mm - 3100021788/01 - SCHWARZ - 20-052 (kn)
Charger Model GTM96060-0606-1.0
Remove the plug adapter by pushing the slider switch
in the direction of the arrow.

Light Guide/Handpiece

Place the glare shield on the front of the device.
Autoclave the light guide prior to first use.
Then attach the light guide to the handpiece until it
noticeably locks into place (see Section "Removing
and Inserting the Light Guide from/into the Hand-
piece").

Charger

If the device malfunctions, insert the charger plug
into the charging socket of the handpiece. The device
will reset itself and can then be used again.

Battery Charging

The device contains a powerful lithium-ion recharge-
able battery. This type of battery does not have any
memory effect and can therefore be recharged at
any time by inserting the charger plug into the
charging socket of the handpiece (see the section
"Battery Power Level Display on Handpiece").
Before using the handpiece for the first time, connect
it to the charger for a period of about 2 hours so that
the new battery is completely charged for the first
time. Make sure the colors line up correctly.
The green status light on the handpiece blinks while
the battery is charging. The green status light glows
steadily when the device is fully charged. As a safety
precaution, light-curing is not possible while the
device is charging.
Status LED
5