Product Description; Intended Use; Technical Data; Charger - 3M Unitek Ortholux Manual Del Usuario

Eyeshield
Handpiece

Product Description

Ortholux Luminous Curing Light, is a high-
performance light source for intraoral polymerization
of orthodontic adhesives. It consists of a charger and
a cordless handpiece powered by a rechargeable
battery. The device is a medical electrical device in
accordance with IEC 60601-1 and is available as a
tabletop device. Wall mounting is not possible.
The light source is a high-performance light-emitting
diode (LED). The emitted light covers the light
wavelengths between 430 and 480 nm.
Settable exposure times:
• 3, 6, 9, or 12 seconds.
• Extended mode (15 seconds)
• Tack cure mode (1 second)
The charger is equipped with an integrated light
intensity testing area.
The unit is shipped with an 8 mm diameter light
guide. It is not permissible to use light guides from
other manufacturers.
The handpiece is equipped with a sleep mode to minimize
the unit's energy consumption. The handpiece switches
to sleep mode once it is placed in the charger or if left
unused for approximately 5 minutes outside the charger.
NOTE: Do not discard these Instructions for the
duration of product use.
All manuals and user guides at all-guides.com
Light guide

Intended Use

•
•

Technical Data

Charger

Operating voltage:
Power input:
Dimensions:
Weight:
Charger
Ortholux Luminous Curing Light is intended for
the polymerization of light-curing orthodontic
adhesives with photoinitiators in the wavelength
range of 430-480 nm.
The high intensity light output of the Ortholux
Luminous Curing Light allows for fast curing
times. Refer to the table under Recommended
Cure Techniques with 3M Unitek Adhesives.
- Though the majority of light-curing orthodontic
adhesives are responsive in this range of
wavelengths, you may wish to contact the
manufacturer of the material in question.
Ortholux Luminous Curing Light is not intended
for use with dental adhesives or other light curing
procedures in a dental office.
100-127 V 50/60 Hz
230 V 50/60 Hz (see rating
plate for factory-set voltage)
Nominal consumption
0.08 A (230 V)
0.16 A (100-127 V)
Length: 170 mm
Width: 95 mm
Height: 50 mm
650 g
Power cord
English 4