Front Panel; Connections And Power - Korg microSTATION Guía Rápida

Easy Start Guide

Connections and power

Use only the included AC adapter.
1.
Using the included AC adapter, connect the microSTATION to an AC outlet.
a Connect the AC adapter's plug to the microSTATION's rear panel power connector.
b To prevent the plug from being accidentally disconnected, wrap the AC adapter cable around the cable hook
located on the microSTATION's rear panel.
c Connect the AC adapter to an AC outlet.
2.
Lower the microSTATION's VOLUME knob.
3.
Connect the microSTATION to your mixer or monitor system.
Connect the microSTATION's OUTPUT L/MONO and R jacks to your mixer or amplified monitor speakers
(p. 9 "Rear panel").
If you're using headphones, connect them to the microSTATION's PHONES jack. The PHONES jacks is located
on the left side of the microSTATION (p. 8 "Front panel").
4.
Lower the volume of the connected equipment.
5.
On the microSTATION's rear panel, press the power switch to turn on the power.
6.
Raise the volume of the connected equipment to an appropriate level. Then gradually raise the
microSTATION's VOLUME to an appropriate level.
10
Connecting the AC adapter
a
b
c