Sony VPL-PX21 Manual De Instalación Para Proveedores página 15

8
Remove two screws (M3×6, with washers) that
lock the front panel. Free the wires from the
clamp.
Clamp
Screw
9
Disconnect the two connectors on the back of the
front panel, one for cooling fan and the other for
remote control detector, and then remove the front
panel.
10
Remove the two screws (M3×6, with washers)
from the front panel. Remove the lens bottom
cover.
Lens bottom cover
11
Install the lens bottom cover on the lens hood
(removed in Step 2) with the two screws.
12
Screw
13
Cooling fan
Remote control
detector
14
Stopper
(Lens)
VPL-PX21/PX31
Connect the connector for remote control detector
and the connector for cooling fan.
Install the front panel on the unit with the two
screws (M3×6, with washers). Fasten the wires
with the clamp.
Clamp
Screw
Install the lens with the lens stopper and the
projector stopper met at their edges.
Notes
• Make sure that lens stoppers and projector
stoppers are met on both sides.
• For ease in identification when you install the
lens, make sure that the lens stopper is facing up.
Stopper
(Projector)
Cooling fan
Remote control
detector
Screw
Stopper
(Projector)
Stopper
(Lens)
(continued)
15
4-080-135-02 (1)