Preliminary Notes - CAME COMMERCIALI Serie Manual Del Usuario

Our MI antipanic breakthrough series have been designed to be applied even on
sliding doors built with any type of adequately adapted commercial series.To this
purpose, the following pages contain the necessary measurements and/or notes
to plan and resize the doors.

Preliminary Notes:

- The preparation of the doorframes must allow the insertion of the hinge pins; it is
recommended that the faced and fixed cross members be mounted with U-bolts;
- Upper and lower hinging alignment must be axial.
- Pay attention to how the hinge elements are attached to the structure. They should be fixed
rigidly in order to avoid that with time vibrations and movement limit efficiency and make the
system unsafe for users;
- If the structure is not strong enough, the assembler must reinforce it.
- Upper and lower hinges must be aligned axially.
- Only in case of mobile doors, it is recommended that the glass be firmly set with silicone
sealant in addition to any other types of weather strip.
- Only stratified or tempered glass should be used.
MOBILE DOORS:
- Resize the length of the upright and cross sections according to the size of the sections
used- follow indications on pages 9÷13;
- Fasten the elements that make up the antipanic system for mobile doors.
- If necessary, insert the "wheel" device (art. P4173). See pg. 3.
ANTIPANIC BAR
- Cut sections PM339A and PM338A and chamfer and bore holes in section PM338A as
indicated on page 20.
- Apply the bar on the mobile door, mount the spiral cable and finish mounting the doors on the
Corsa or Rodeo beam, adapting the instructions for the S40 series on pages 21-23.
- Carry out the power connections and checks as indicated on page 24.
MAKE SURE THE BREAKTHROUGH SIDE IS THE CORRECT ONE AND THAT THE ANTIPANIC SYSTEM FOR
- pg. 8 -
istruzioni di montaggio per istruzioni di montaggio per SERIE COMMERCIALI istruzioni di montaggio per
istruzioni di montaggio per istruzioni di montaggio per
MOBILE DOORS IS COMPLETE BEFORE PERFORMING ANY MACHINING WORK!
SERIE COMMERCIALI SERIE COMMERCIALI SERIE COMMERCIALI
SERIE COMMERCIALI