CAME COMMERCIALI Serie Manual Del Usuario página 44

2
42
111
180
BREAKTHROUGH
DIRECTION
INDOOR ROOM TO BE EVACUATED
- pg. 20 -
ANTIPANIC BAR machining ANTIPANIC BAR machining
ANTIPANIC BAR machining ANTIPANIC BAR machining ANTIPANIC BAR machining
Wl + 50
bore a ∅7 hole with a 200 max pitch
- Take out the PM339A (1)
and PM338A (2) upper and lower
hooking sections from the
package and remove the parts
inserted into them.
- Cut them to the proper
length using the indicated formu-
la.
- Correctly evaluate the
breakthrough side of the doors and
work the lower section (2) as in
the illustration **. .
** The illustration shows the
work that must be performed on
the left door. The right door will
require mirror-image work.
DX
SX
1
2
BREAKTHROUGH
DIRECTION
INDOOR ROOM TO BE EVACUATED