CAME COMMERCIALI Serie Manual Del Usuario página 45

S40 series - ANTIPANIC BAR application on MOBILE DOORS S40 series - ANTIPANIC BAR application on MOBILE DOORS
S40 series - ANTIPANIC BAR application on MOBILE DOORS S40 series - ANTIPANIC BAR application on MOBILE DOORS S40 series - ANTIPANIC BAR application on MOBILE DOORS
PM205
4
MAL226 section for
outside application
PM912
PM207
C
D
MAMF002
A - Insert the PM205 upper pin and PM912 lower pin in the MAL226 back upright section and screw on with
screws provided in the holes indicated. Correctly align to the section before screwing on.
B - Assemble the joint parts to the jutting pin. Temporarily fasten M8X40 hooking screw.
C - Insert the PM338A lower section to the PM207 lower joint, making sure the breakthrough side is facing
the right way.
D - Match the two elements together (loosen M8X40 screw if necessary), align the door and bore a ∅ 4.5
hole matching the holes previously bored on the PM338A section and screw with ∅ 5.5 self-tapping
screws. The two edge screws will be screwed onto the MAMF002 edge elements (doorframe fixing
squares) to ensure more stability when fastening.
A
MAL227 section for
inside application
1
UNI5931
M8x40
6
2
PM338A
B
- pg. 21 -