Preparation; Operating Elements And How They Work; Setting Up - Parkside PHD 135 D3 Traducción Del Manual De Instrucciones Origina

the device or to exchange an ac-
cessory part.
Handle the device with care and
•
keep it clean.
Store the device out of reach of
•
children.

Preparation

⚠ WARNING! Risk of injury due to unintention-
al start-up. Do not insert the plug into the socket
until the device is fully prepared for use.
According to current regulations, the
pressure washer must never be connect-
ed to the drinking water network with-
out a system separator. A suitable system
separator must be used in accordance
with EN 12729 Type BA.
Water that has flowed through a system separa-
tor is classified as non-potable.
System separators are available from specialist
dealers.
A system separator (check valve) prevents the
backflow of water and cleaning agent into the
drinking water pipeline.
– Use a standard garden hose for the water
supply and make sure it is long enough.
– Use the device on a domestic water connec-
tion with an output of at least 450 l/h.
Operating elements and how
they work
Familiarise yourself with the operating elements
before using the device for the first time.
Pistol grip (1)
• Switch lever (13)
• Pulling the switch lever: Activates the pres-
sure jet
• Releasing the switch lever: Deactivates
the pressure jet
• Switch lever child safety lock (16)
(seen from behind)
⭠ The switch lever is locked ��
⭢ You can pull the switch lever ��
⚠ WARNING! Risk of injury due to pressure
jet! Lock the switch lever every time you take a
break.
Bow-type handle (28)
With the bow-type handle folded out, you can
conveniently roll the device.
• The handle can only be folded out if the
holder for the mains connection cable (6)
and the high-pressure hose (5) are pushed in.
• Folding out the handle:
Press the release (4) and fold the bow-type
handle up.
• Putting the handle away:
Press the release and fold the bow-type han-
dle down.

Setting up

Setting up the device
1. Place the device horizontally on a level sur-
face.
2. Plug the threaded connection (11) on the
high-pressure hose (23) into the high-pressure
connection (10) on the device. Fix the con-
nection with the coupling nut.
3. Plug the quick connector (14) on the
high-pressure hose into the high-pressure con-
nection on the pistol grip (1).
4. Do not guide the hose through the bow-type
handle (28) as to not obstruct the bow-type
handle.
5. Fit a suitable attachment.
Mains connection
⚠ WARNING! Risk of injury due to unintention-
al start-up. Do not insert the plug into the device
until it is fully prepared for use
• Prior to use, always check the connecting
cable and extension cable for signs of dam-
GB MT
53