Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Working instructions
Changing the pressure
setting
(only the cordless compressor)
1. Switch the display (4) on the cordless
compressor on (see "Switching on/
off").
2. Press the "+" button (7) on the display
(4) to increase the pressure setting.
Press and hold the "+" button (7) for
approx. 3 seconds. The numbers on
the display (4) begin to flash. You can
now increase the preset value by pres-
sing the "+" button (7). The number is
increased by 0.1 bar / 1 PSI each time
you press.
3. To decrease the preset value, proceed
in the same way but using the "-" but-
ton (5).
By briefly pressing the On/off
button (6) on the display, you can
switch the display of the pressu-
re unit between "bar" and "psi"
(pounds per square inch). The
display (4) has to be on (see "Swit-
ching on/off").
Cleaning and Servicing
Switch off the device and re-
move the battery before car-
rying out any maintenance
work.
you should have any repair and
maintenance work that is not de-
scribed in these instructions carried
out by our Service Centre. Only use
original parts.
Perform the following maintenance and
cleaning work regularly. This will guaran-
tee long and reliable use.
Cleaning
The device must not be
sprayed with water or placed
in water. otherwise there is
a risk of electric shock.
Do not use any cleaning agents or
solvents. This could damage the
device irreparably. Chemical subs-
tances may attack the plastic parts
of the device.
• Clean the housing with a dry cloth or
paint brush.
• Keep the ventilation slits, motor housing
and handles of the machine clean.
Use a damp cloth or brush to do this.
Maintenance
The device is maintenance free.
Storage
For simple storage, you can press
the compressed air hose (12) into
the compressed air holder (2) on
the side of the cordless compressor.
• Always store the devices and acces-
sories:
- dry.
- clean.
- protected against dust.
- out of the reach of children.
GB
MT
45
Publicidad
Capítulos
Tabla de contenido
