Noise/Vibration Information - Bosch GO Professional Manual Original

Cordless Screwdriver
Recommended chargers
A) measured at 20 - 25 °C
B) Limited performance at temperatures <0 °C
Charger
Article number
– UK
– EU
– AU
– KO
– JP
Battery charging voltage
Charge current
Protection class
A) only for use with Bosch GO

Noise/vibration information

Noise emission values determined according to EN 62841-2-2.
Typically, the A-weighted sound pressure level of the power tool is less than 70 dB(A).
The noise level when working can exceed the volume stated. Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to
h
EN 62841-2-2:
Screwdriving: a < 2.5 m/s
h
The vibration level and noise emission value given in these instructions have been meas-
ured in accordance with a standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary estimation of vibration and
noise emissions.
The stated vibration level and noise emission value represent the main applications of
the power tool. However, if the power tool is used for other applications, with different
application tools or is poorly maintained, the vibration level and noise emission value
may differ. This may significantly increase the vibration and noise emissions over the
total working period.
To estimate vibration and noise emissions accurately, the times when the tool is
switched off or when it is running but not actually being used should also be taken into
Bosch Power Tools
2 2
, K = 1.5 m/s
English | 23
V/mA 5/1000
2 609 120 718
2 609 120 713
2 609 120 717
2 609 120 716
2 609 120 715
V
mA
1 609 92A 6M4 | (21.05.2021)
GO
A)
A)
5
1000
/ II