On/Off Control - Frontier BG1000 Manual Del Operador

OPERATING INSTRUCTIONS (CONTINUED)
THE CONTROLS FOR BG1000

ON/OFF CONTROL

This toggle switch on top side of the grind motor is used to turn the grind motor on or off.
GRIND MOTOR ON/OFF
SWITCH
INFEED HANDWHEEL
Turning the handle counterclockwise infeeds the grinding wheel, while turning the knob clockwise will
move the grinding wheel away from the bedknife.
ALWAYS WEAR PROPER SAFETY EYEWEAR AND RESPIRATOR
EQUIPMENT WHEN OPERATING YOUR GRINDER. NEVER
TURN ON YOUR GRINDER WITHOUT FIRST PUTTING ON THIS
EQUIPMENT.
THE MAXIMUM RECOMMENDED INFEED IS .003". THIS IS
APPROXIMATELY 1/24TH OF A TURN OF THE KNOB, OR A
ROTATION OF 15 DEGREES.
FIG. 4
13
FIG. 3