Frontier BG1000 Manual Del Operador página 24

DEALER PREPARATION/INSTALLATION CHECK LIST
It is the responsibility of the dealer to complete the procedures listed in the Operators Manual then
review this checklist with the customer upon the delivery or the sale of this equipment.The installation
training goes over the basic operational functions of the equipment. To ensure adequate training, we
require that the following items are reviewed by your John Deere Dealer. Please check off to ensure
that you understand the following items before the installation training is complete:
IMPORTANT SAFETY MESSAGE FOR OWNERS/OPERATORS OF BEDKNIFE GRINDERS
Safety is a primary concern in the design,
manufacture, sale, and use of a bedknife grinders.
As a manufacturer of bedknife grinders, we want to
confirm to you, our customers, our concern for safety.
We also want to remind you about the simple, basic,
and common sense rules of safety when using a
bedknife grinder. Failure to follow these rules can
result in severe injury or death to operators or
bystanders.
It is essential that everyone involved in the assembly,
operation, transport, maintenance, and storage of
this equipment be aware, concerned, prudent, and
properly trained in safety. Always use proper
shielding as specified by the manufacturer.
Our current production machines include, as
standard equipment, guards or shields for the
grinding wheel, safety signs and an operator's
manual. Never bypass or operate the machine with
any of the guards or the safety devices removed.
Read and fully understand all the safety
practices discussed on pages 4 and 5 of this
and the operator's manual. All safety rules must
be understood and followed by anyone who
works with this bedknife grinders.
IS LOCATED IN THE OPERATOR'S MANUAL
SEE OPERATOR'S MANUAL FOR INSTALLTION CHECKLIST
Safety
Before operating a bedknife grinder, an operator
must read and understand all of the information in
the operator's manual and in the safety signs
attached to the product. A person who has not read
or understood the operator's manual and safety
signs is not qualified to operate the unit. Accidents
occur often on machines that are used by
someone who has not read the operator's manual
and is not familiar with the equipment. If you do
not have an operator's manual or the current
production safety signs, contact your dealer
immediately.
Bedknife grinders are designed for one-man
operation. Never operate the grinder with anyone
near, or in contact with, any part of the grinder. Be
sure no one else, including bystanders, are near
you when you operate this product.
Following these simple, basic safety rules, as well
as others identified in the owner's manual and in
the product safety signs, will help minimize the
possibility of accidents and increase your
productivity in using this product. Be careful and
make sure that everyone who operates the grinder
knows and understands that this is a very
powerful piece of machinery, and if used
improperly, serious injury or death may result. The
final responsibility for safety rests with the
operator of this machine.
2