Safety Instructions - Frontier BG1000 Manual Del Operador

SAFETY INSTRUCTIONS

The Warning Symbol identifies special
instructions or procedures which, if not
correctly followed, could result in personal
injury, or loss of life.
1. KEEP GUARDS IN PLACE and in working
order.
2. REMOVE ADJUSTING KEYS AND
WRENCHES.
3. KEEP WORK AREA CLEAN.
4. DON'T USE IN DANGEROUS
ENVIRONMENT. Don't use power tools in
damp/ wet locations, or expose them to
rain. Keep work area well lit.
5. KEEP ALL VISITORS AWAY. All visitors
should be kept at a safe distance from the
work area.
6. MAKE WORKSHOP CHILD-PROOF. With
padlocks or master switches.
7. DON'T FORCE THE GRINDER. It will do
the job better and safer if used as specified
in this manual.
8. USE THE RIGHT TOOL. Don't force the
grinder or an attachment to do a job for
which it was not designed.
9. WEAR PROPER APPAREL. Wear no loose
clothing, gloves, neckties, or jewelry which
may get caught in moving parts. Nonslip
foot wear is recommended. Wear
protective hair covering to contain long hair.
10. ALWAYS USE SAFETY GLASSES.
11. SECURE WORK. Mount the bed knife in
place before grinding as prescribed in the
operations manual.
12. DO NOT OVERREACH. Keep proper
footing and balance at all times.
Safety Awareness Symbols are inserted in
this manual to alert you to possible Safety
Hazards. Whenever you see these symbols,
follow their instructions.
The Caution Symbol identifies special
instructions or procedures which, if not
strictly observed, could result in damage
to or destruction of equipment.
13. MAINTAIN GRINDER WITH CARE.
Follow instructions in Service Section for
lubrication and preventive maintenance.
14. DISCONNECT POWER BEFORE
SERVICING.
15. REDUCE RISK OF UNINTENTIONAL
STARTING. Make sure switch is in OFF
position before plugging in the grinder.
16. USE RECOMMENDED ACCESSORIES.
Consult the manual for recommended
accessories. Using improper accessories
may cause risk of personal injury.
17. CHECK DAMAGED PARTS. A guard or
other part that is damaged or will not
perform its intended function, should be
properly repaired or replaced.
18. NEVER LEAVE GRINDER RUNNING
UNATTENDED. TURN POWER OFF. Do
not leave grinder until it comes to a
complete stop.
19. KNOW YOUR EQUIPMENT. Read this
manual carefully. Learn its application and
limitations as well as specified potential
hazards.
20. KEEP ALL SAFETY DECALS CLEAN &
LEGIBLE. If safety decals become
damaged or illegible for any reason,
replace immediately. Refer to replacement
parts illustrations in Service Section for the
proper location and part numbers of safety
decals.
21. DO NOT OPERATE THE GRINDER
WHEN UNDER the influence of drugs,
alcohol, or medication.
4