ClassicFlame 23EF004GRA Manual De Funcionamiento Para El Propietario página 7

TO ACCESS CONTROL PANEL- Open the front glass doors, then slide the mesh curtains to the sides. Lift the
hinged door that covers the control panel (figure 5).
MAIN POWER
The MAIN POWER button supplies power to all of
the functions of the fireplace. This button must be
in the ON position for any of the functions to work
including the remote. The remote will not turn this
switch off. Power is indicated by the red LED light
next to the button.
FLAME
The FLAME button controls the flame effect. Press
the button to increase the brightness of the flames.
Each time the button is pressed it will increase the
intensity of the flames. There are 5 brightness levels
including the "OFF" position. The red LED lights
next to the button represents the current setting. The
remote control works in conjunction with the control
panel.
TEMPERATURE
The TEMPERATURE button supplies power to the
heater and blower. Press the button to raise the heat
set temperature, there are five preset temperature
settings and an OFF setting. Each time the button is
pressed it will cycle to the next setting. The red LED
lights next to the button represents the current set-
ting. The remote control works in conjunction with
the control panel.
Model #
23EF004GRA
Model #
28EF004GRS
33EF004GRS
SECTION 4: OPERATION
CONTROL PANEL FUNCTIONS
Figure 6
ON
MAIN POWER
Figure 7
ON
OFF
MAIN POWER
E-7
DOWNLIGHT
(Models: 28EF004GRS & 33EF004GRS only)
The DOWNLIGHT button provides power to the
downlight that illuminates the top of the logs and
the inside of the firebox.
LIFT
OFF
TEMPERATURE
FLAME
TEMPERATURE
Figure 5
CONTROL PANEL
FLAME
DOWNLIGHT