Taurus ROWZER Instrucciones Originales página 18

keys to select from the 6 languages
available and confirm by pressing the
"START" button(A6)
Use:
- Unroll the cable completely before
plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on using the on/
off switch.
- The message "Awaiting JAR" will
appear in the screen (Fig. 4).For safety
reasons, the machine will not function
if the jar is not in place.
- Fit the blade (E) onto the spindle
of the lid (D), and ensure that it is
correctly secured (Fig. 5)
- Place the vessel (F) into the jar (G)
- Place the jar in the machine with the
handle to the user's right-hand-side
(Fig. 2)
- Couple the jar by turning it 90º
clockwise. When it reaches the correct
position you will hear 2 clicks (Fig. 3)
- The screen will display the message
"Insert PORTION: 0 "
- Select the portion you wish to
process, between 1 and 10, by using
the "+" button to increase the portion
(A2) and the "-" button to reduce it
(A5)
- The "STOP / DELETE" button sets
the counter to 0 (A7)
- Press the "START" button to begin
the processing. (A6)
- The screen will display the portions
requested, those processed and an
arrow indicating whether the machine
is raising or lowering.
- When the process is complete, you
will hear an acoustic signal and the
screen will be lit in green, indicating
the portions that have been processed
and those remaining unprocessed in
the vessel.
- In some preparations, pressure may
remain in the jar (G). We recommend
pressing the decompression button (K)
to allow the jar to be removed (G).
Double processing function:
- The double processing function
enables you to make a second pass
of the blades through the processed
ice-cream, in order to obtain
optimum textures in ice-creams that
are very cold or have a high water
content. To do this, press the button
corresponding to this function (A3).
- The screen will show the message
"2P" beside the selected portions.
The machine will perform this function
on the selected portions when the
"START" button has been pressed.
Cancel function:
- The cancel function enables you
to interrupt the running of the
appliance. To do so, press the button
corresponding to this function (A7).
The screen will display the message
"Starting", the machine will return to
its initial position and the screen will
display the message "Insert Portion:
0" when the machine is ready to
process once more.
- When the machine has reached
the start, we recommend checking
that the blade is well secured before
beginning a new processing.
Safety thermal protector:
- The appliance has a safety device,
which protects the appliance from