Setting The Time - Oakley TRANSFER CASE Manual De Instrucciones

2 | OAKLEY TRANSFER CASE INSTRUCTION MANUAL
™
OAKLEY TRANSFER CASE
™
Crafted with design cues from the cogs of industrial automation, Oakley Transfer Case
our coveted Oakley Gearbox timepiece. The chassis is aligned away from the ordinary to put a fresh angle on originality.
™
Powered by a 45-month battery, the Swiss Made quartz movement is bunkered in 316L stainless steel matched with a
pure sapphire crystal. The dimensionally sculptured strap is composed of Oakley Unobtainium
an impact-forged stainless steel buckle. With its three-hand analog display, Transfer Case respects the simple beauty of
design purity, and the might of mechanized automation.
* This manual applies to all stylized versions of the timepiece, including potential future renditions that may feature alternatives to the strap
or bracelet described here.
™ honors the machine language of
rubber and paired with
®
For normal use, the crown rests against the case to
maintain a protective seal. The crown can be pulled out
to an extended position for setting the time.
1. Pull the crown out to the extended position (a).
2. Turn the crown to set the hour and minute hands.
3. Push the crown back down against the case.
To set the exact second, wait until the second
counting hand reaches the mark at the top of the dial
face before you pull out the crown. Set the time then
wait until the exact second is reached before pushing
the crown back down.
OAKLEY TRANSFER CASE INSTRUCTION MANUAL | 3
™

SETTING THE TIME

CROWN
SECOND HAND
A