Setting The Time And Date - Oakley GMT Manual De Instrucciones

02 GMT INSTRUCTION MANUAL
SETTING THE WATCH FOR THE FIRST TIME
Use the following instructions when setting the watch for the first time. The procedure is necessary to
synchronize the date-change function with midnight.
1. Pull the main crown out to the first click position.
2. Turn the main crown clockwise so the date advances,
and set it to yesterday's date.
3. When the second hand in the small dial face at the
left reaches the zero position (points straight up), pull
the main crown out to the second click position.
4. Turn the crown clockwise so the minute and hour
hands move forward. Continue turning until the date
changes to today's date, then continue until the
current time is reached. (If the current time is PM,
advance the hour hand all the way around to pass
noon before stopping on the current evening time).
5. Push the main crown back in to the normal position.
After the watch is set for the first time with the procedure described on the previous page, future
adjustment of time and date settings can be made by doing the following.
TO SET THE TIME:
1. Pull the main crown out to the second click position.
2. Turn the main crown clockwise or counterclockwise
to set the hour and minute hands.
(
To set the minute hand precisely, advance the
hand to 5 minutes or more past the desired time,
then turn it back to the desired time.
3. Push the main crown back in to the normal position.
When setting the time, note the following:
• The watch will resume running when the main crown
is pushed back in, so use this to set the watch to the
precise second: Wait until the second hand (in the
small dial face at the left) points straight up before
pulling the main crown to set the time. With the
second hand stopped at this zero position, restart the
watch by pushing the main crown back in when the
precise minute is reached.
GMT INSTRUCTION MANUAL 03

SETTING THE TIME AND DATE

TO SET THE DATE:
1. Pull the main crown out to the first click position.
2. Turn the main crown clockwise until the desired date
appears in the date window.
)
3. Push the main crown back in to the normal position.
When setting the date, note the following:
• It is necessary to reset the date at the end of months
that have fewer than 31 days.
• Avoid resetting the date between 9:00 PM and 3:00
AM. Doing so may cause the date display to change
at noon instead of midnight. If it is necessary to reset
the date during that time period, follow the
instructions under "SETTING THE WATCH FOR
THE FIRST TIME."