Setting The Date And Time - Oakley BOTTLE CAP Manual De Instrucciones

Your Oakley timepiece has a push-down crown with
a dual seal for added protection against moisture. The
crown can be pulled out to two click positions. The first
click position is for setting the date. The second click
position is for setting the time.
To set the timepiece the first time (or to reset the date
and time after the battery is replaced), do the following:
1. Pull the crown out to the first click position (a).
2. Turn the crown clockwise until yesterday's date appears.
3. Pull the crown out to the second click position (b).
4. Turn the hands forward until today's date appears,
then continue forward until the current time is
displayed. If the current time is in the afternoon or
evening, move the hour hand all the way around the
dial to pass noon.
5. Push the crown back in so it is fully pressed down
against the case.
To set the exact second, wait until the second-
counting hand reaches "O" at the top of the dial before
you pull out the crown to the second click position
(b). Set the time then wait until the exact second is
reached before pushing the crown back in.
OAKLEY BOTTLE CAP
™

SETTING THE DATE AND TIME

SECOND HAND
INSTRUCTION MANUAL | 3
CROWN
a
DATE
b