JVC KW-NSX700 Manual De Instrucciones página 68

Symptom
No sound comes out of the speakers.
The iPod/iPhone does not turn on or does
not work.
Sound is distorted.
A lot of noise is generated.
No operations are available when playing
back a track containing Artwork.
Sound does not synchronize with the video.
• Videos cannot be played.
• No sound of videos come out.
No picture appears on the screen.
Remedy/Cause
• Disconnect the iPod, then connect it again.
• Select another source, then reselect "iPod".
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Check whether the iPod control mode is correctly
selected. (☞ page 27)
• Reset the iPod/iPhone.
Deactivate the equalizer either on this unit or the iPod/
iPhone.
Turn off (uncheck) "VoiceOver" of the iPod. For details, visit
<http://www.apple.com>.
Operate the unit after the Artwork is loaded.
Select [iPod] for <AV Input>. (☞ page 48)
• Connect with USB Audio and Video cable JVC KS-U30.
Other cables cannot be used.
• Select [iPod] for <AV Input>. (☞ page 48)
• Turn on the video component if it is not on.
• Connect the video component correctly.
68