FAAC B 604 Manual De Instrucciones página 9

1. DESCRIPTION OF COMPONENTS
2. TECHNICAL SPECIFICATIONS
3. DIMENSIONS
4. ELECTRIC PREPARATIONS (standard system)
4. INSTALLING THE AUTOMATED SYSTEM
4.1. PRELIMINARY CHECKS
4.2. ON-COLUMN INSTALLATION
4.3. ON-WALL INSTALLATION
4.4. CLOSING DIRECTION
4.5. SECURING THE ROD
5. START-UP
6. MANUAL OPERATION
7. RESTORING NORMAL OPERATION MODE
8. AVAILABLE ACCESSORIES
9. MAINTENANCE
10. REPAIRS
10.1. REPLACEMENT OF FLASHING LAMP
Manufacturer: FAAC S.p.A.
Address: Via Benini, 1 40069 Zola Predosa Bologna ITALY
Declares that: Operator mod. B 604 24V with 230 Vac power supply
• is built to be incorporated in a machine or to be assembled with other machinery to create a machine under the provisions of
Directive 98/37/EC;
• conforms to the essential safety requirements of the other following EEC directives:
73/23/EEC and subsequent amendment 93/68/EEC.
89/336/EEC and subsequent amendment 92/31/EEC and 93/68/EEC
Furthermore, the manufacturer declares that the machinery must not be put into service until the machine into which it will be
incorporated or of which it will become a part has been identified and its conformity to the conditions of Directive 98/37/EC has
been declared.
Bologna, 30-06-2007
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol
INDEX
CE DECLARATION OF CONFORMITY
Notes on reading the instruction
draws your attention to the notes on the characteristics and operation of the product.
Managing Director
A. Bassi
7
page.8
page.8
page.8
page.8
page.9
page.9
page.9
page.10
page.11
page.11
page.11
page.12
page.12
page.12
page.12
page.12
page.12