GI.BI.DI. SC230 Manual Del Usuario página 11

SC230
ELECTRICAL CONNECTIONS: FASTONS
Position Signal
1 CN2 CN3
2 CN4 CN5
ELECTRICAL CONNECTIONS: TERMINAL BOARDS
Terminal Position
1
M1
2
3
4
M2 5
6
7
8
9
10
M3
11
12
13
14
15
16
M4
WARNING
17
18
19
20
M5
21
PROTECTION FUSES
Position Value
F1 500 mA
F2 5 A
F3 500 mA
Description
Ground connection
Motor capacitor connection
Signal Description
PHASE 230 Vac power supply
NEUTR 230 Vac power supply
LAMP Flashlight output 230 Vac 40W
LAMP Flashlight output 230 Vac 40W
COM Motor common
OPEN Motor connection (opening)
CLOSE Motor connection (closing)
PED PEDESTRIAN input (N.O.)
START START input (N.O.)
PHOTO PHOTOCELL input (N.C.). If not used, jumper with terminal 13
SAFETY DEVICE input (N.C.). If not used, jumper with terminal 13
SAFETY
STOP input (N.C.). If not used, jumper with terminal 13 or set dip switch 10 to ON
STOP
COM
COMMON INPUTS/OUTPUTS
GND External accessory power supply and inductive sensor ground (blue cable)
24Vac 24 Vac external accessory power supply (photocells, radio, etc.)
24 Vac external safety device power supply present only during the operating cycle
SEC
WARNING LIGHT output 24 Vac 3W max
LIGHT
12V Inductive sensor positive power supply (brown cable)
IMP Inductive sensor input (black cable)
GND ANTENNA GROUND input
ANT ANTENNA SIGNAL input
Type Description
FAST Protects the ACCESSORY and SAFETY DEVICE power supply outputs
FAST Protects the control unit at the 230 Vac power supply input
FAST Protects the flashlight output
Slow flashing in opening, turned off in
pause, fast flashing in closing.
Slow flashing in opening, turned off fixed
in pause, fast flashing in closing.
11
UK